Tips For Placing Your Industrial Blower
Posted on: 28 August 2015
When you purchase a blower, you are essentially purchasing a piece of equipment that is designed to force hazardous or irritating fumes out of the workplace in order to ensure that the production process goes smoothly. However, in order to make sure that a blower is truly effective, you need to ensure that it is placed correctly. Here are some tips for placing your industrial blower.
1. In the Center
The first thing that you need to ensure is that the blower is placed directly in the center of the location of the fumes. To determine this, you are going to need to figure out what fumes you are producing, as well as the average distance that they are able to travel in a given amount of time. You should be able to look this information up. Once you have this information, you will want to place the blower in the center of the fumes in order to make sure that you catch all of the fumes that are being produced by any source in the factory, as well as ensure that you are directing fumes at their strongest point. It can sometimes take time for fumes to reach their full volume and expansion speed, so you want to make sure that you head them off as soon as they reach this point.
2. Near an Exit
Another factor that you are going to want to consider is whether or not the fumes are near an exit or if your blower is able to direct them to an exit. If your blower is not in a location where you can direct the fumes to an area where they safely disperse, then there's no point to a blower at all. You want the direct the fumes to an air treatment center within your company or outside with as few obstacles as possible in order to make sure that you get rid of fumes as effectively as possible. Try to set up your blower near an air vent or other escape route.
3. Away From Workers
Finally you are going to want to make sure that you place the blower away from any of your workers in order to make sure that you don't interfere with their work. You want the line of air to the escape route to not be an obstacle for your production, as well as to not have obstacles itself and placing the blower away from production centers is one way to make sure that this happens.
For more information, contact a company that specializes in blower installation or visit a website like http://www.compressor-pump.com.
Share